Tova Posted May 29, 2009 Share Posted May 29, 2009 Purtroppo tutto vero , i problemi sono localizzati nel pedale del freno , in mancanza di istruzioni scritte che accompagnavano il prodotto ho costatato che mancano anche online . Nemmeno il drive mi sebra fatto da uno scienziato , Link to comment Share on other sites More sharing options...
Tova Posted May 29, 2009 Share Posted May 29, 2009 Purtroppo tutto vero , i problemi sono localizzati nel pedale del freno , in mancanza di istruzioni scritte che accompagnavano il prodotto ho costatato che mancano anche online . Nemmeno il drive mi sebra fatto da uno scienziato , Link to comment Share on other sites More sharing options...
andy2 Posted May 29, 2009 Share Posted May 29, 2009 Prima cosa grazie per il vari consigli , il potenziometro se non lo lascio tutto aperto ( MAX ) , crea un problema , il freno risulta leggermente in frenata e lo si vede nella barra di rFactor , ho migliorato la situazione regolando dal pannello di controllo delle periferiche , come qualcuno consigliava . Pero' in ogni caso in tutte le salse , se volutamente si vuole fare la grande inchiodata , sempre a fondo corsa bisogna arrivare . Per le foto dovete pazientare , il lavoro mi tiene impegnato e non nel box ....il lancio nel cesso era chiaramente virtuale ed emotivo , il ritardo nella consegna non era un problema , ma non trovare nel sito Fanatec delle veloci istruzioni e accorgimenti per risolvere ( naturali ) i probemucci , mi sembrava poco carino per chi ha dato da subito credito . Probabilmente con 4 accorgimenti tutto si risove . Vi faro' sapere . Bye Bye e grazie ancora Link to comment Share on other sites More sharing options...
VELOCIPEDE Posted May 29, 2009 Author Share Posted May 29, 2009 nessuno che vuole cimentarsi in una bella recensione? Link to comment Share on other sites More sharing options...
VELOCIPEDE Posted June 9, 2009 Author Share Posted June 9, 2009 Firmware Update http://www.911wheel.de/?q=node/2037 Attached you find an update porgram to update your CSP with newfirmware. The new firmware has these improvements: * Select the amount of brake dead zone (down to 0) * Broader range of adjustment possibility on the brake with the potentiometer The 64 bit version has not been tested enough so it is Beta. Let me know in case you have problems with it. Link to comment Share on other sites More sharing options...
Guest Dragon Posted June 9, 2009 Share Posted June 9, 2009 nessuno che vuole cimentarsi in una bella recensione? Quoto, ora col firmware nuovo testate che il tutto funzioni e poi una bella recensione per noi altri non sarebbe male )) Link to comment Share on other sites More sharing options...
axeljts Posted June 10, 2009 Share Posted June 10, 2009 Chiedo scusa, mi intrometto....volevo chiedere a Tova se ha ricevuto il mio messaggio privato in quanto ho fatto un po' di casino credo....al limite lo rimando.... Grazie e scusate ancora... Saluti ! Axel Link to comment Share on other sites More sharing options...
Tova Posted June 11, 2009 Share Posted June 11, 2009 Chiedo scusa, mi intrometto....volevo chiedere a Tova se ha ricevuto il mio messaggio privato in quanto ho fatto un po' di casino credo....al limite lo rimando.... Grazie e scusate ancora... Saluti ! Axel Ciao , vai a leggere la risposta. ciao Tova Link to comment Share on other sites More sharing options...
andy2 Posted June 12, 2009 Share Posted June 12, 2009 Una recensione non sarei in grado di farla perch Link to comment Share on other sites More sharing options...
VELOCIPEDE Posted July 1, 2009 Author Share Posted July 1, 2009 New Driver version 097 available http://www.911wheel.de/?q=node/2089 This driver has undergone a complete rework of the installation routine and we made several bugfixes regarding the following issues: * installation problems * problems to detect the correct wheel * rFactor plug in issues Note: install the new rfactor .dll before you install the driver. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now