Guest darkgift Posted May 1, 2006 Posted May 1, 2006 file.controller?? che fa?? Mi ha impostato le forze in maniera a dir poco perfetta ! ed ha risolto anche il mio vecchio ed irrisolto problema che il ff a volte non si avvertiva su certi cordoli. UN GRAZIE DI CUORE A CHI LO HA POSTATO E A CHI LO HA CREATO(gilles credo che sia) !! Comunque sto impazzendo per questo MOD.......secondo me e' superiore a qualsiasi gioco o mod uscito finora......GTR ti scartavetra gli ammennicoli a confronto !! 10 e lode !!!!! Speriamo che gli RSDG continuino cosi'.
Guest D3vil Posted May 1, 2006 Posted May 1, 2006 file.controller?? che fa?? Mi ha impostato le forze in maniera a dir poco perfetta ! ed ha risolto anche il mio vecchio ed irrisolto problema che il ff a volte non si avvertiva su certi cordoli. UN GRAZIE DI CUORE A CHI LO HA POSTATO E A CHI LO HA CREATO(gilles credo che sia) !! Comunque sto impazzendo per questo MOD.......secondo me e' superiore a qualsiasi gioco o mod uscito finora......GTR ti scartavetra gli ammennicoli a confronto !! 10 e lode !!!!! Speriamo che gli RSDG continuino cosi'. Potresti postare il file con le modifiche del FF? Ho anch'io il momo racing. Oppure mandarmelo in PM. Grazie
Guest darkgift Posted May 1, 2006 Posted May 1, 2006 IO HO SEGUITO QUESTE ISTRUZIONI: "Anch'io ho il momo racing, e copiando i dati del PLR modificato (dall'esperto Gilles) direttamente nelle linee corrispondenti del file "Controller" (in ---> UserData/nomegiocatore) mi ci trovo benissimo. le righe da sostituire sono queste (aprilo con notepad): [ Force Feedback ] FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.00000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.00000" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force average weight="0.60000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency. FFB steer force exponent="0.75000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11000.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="2.20000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip weight="0.70000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer update thresh="0.00800" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.01000" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.08000" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.17000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.06000" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.07000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.70000" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.10000" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="1" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.04000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.98000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="0.70000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-1.80000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.06000" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="1.60000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.
Guest FlyingV Posted May 1, 2006 Posted May 1, 2006 provato...veramente divertente!! rimane qualche dubbio sulla fisica in certe situazioni, ma nel complesso
Guest D3vil Posted May 1, 2006 Posted May 1, 2006 IO HO SEGUITO QUESTE ISTRUZIONI: "Anch'io ho il momo racing, e copiando i dati del PLR modificato (dall'esperto Gilles) direttamente nelle linee corrispondenti del file "Controller" (in ---> UserData/nomegiocatore) mi ci trovo benissimo. le righe da sostituire sono queste (aprilo con notepad): [ Force Feedback ] FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.00000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.00000" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force average weight="0.60000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency. FFB steer force exponent="0.75000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11000.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="2.20000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip weight="0.70000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer update thresh="0.00800" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.01000" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.08000" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.17000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.06000" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.07000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.70000" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.10000" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="1" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.04000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.98000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="0.70000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-1.80000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.06000" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="1.60000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0. Grazie!!! ora provo. ciao
VENTU Posted May 1, 2006 Posted May 1, 2006 grande!! ora ce l ho duro!!! cosa avete capito, il volante grazie!!
Guest hiroshi976 Posted May 1, 2006 Posted May 1, 2006 ..... io mi trovo bene con questi settaggi.... li posto magari qualcuno vuole provarli.......... [ Force Feedback ] FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Ignore Controllers="0" // Do not use FFB on: 1=controller1, 2=controller2, 4=controller3 (or add values to ignore multiple controllers) FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.70000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.03500" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force average weight="0.95000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency. FFB steer force exponent="0.70000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="2.20000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip weight="0.98000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer force grip factor="0.40000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6 (previously hardcoded to 0.4). How much of a factor the front wheel grip is on the steering weight. FFB steer front grip fract="0.00000" // Range 0.0 to 1.0 (previous hardcoded value was 0.0), additional effect of front grip loss on steering force FFB steer update thresh="0.00400" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.05000" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.18500" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.15000" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.05000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.70000" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.20000" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="1" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.05000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.85000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="0.70000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-1.80000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.06000" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="2.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0. se volete uno sterzo meno **gripposo** e duro........ FFB steer force output max="1.90000" FFB steer force grip weight="0.75000" spero possa essere utile!
Guest dadozero Posted May 1, 2006 Posted May 1, 2006 ###### zozza thunder fai sempre degli screen della madonna nulla da aggiungere
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now