GTR2 o Rfactor1?

[Vaillant]

...... niente avevo letto rF1

Edited October 8, 2013 by Vaillant

[oppolo]

E ti pareva ...

che ne pensi di race07?

 

bah, su steam per pochi euri prendi lui e qualche espansione, ho iniziato un camp formula master/wtcc, finche' mi piace vado avanti

[Guest fillo01]

ad intelligenza artificiale GTR2 come è messo? avrei voglia di fare qualche gara in single player e l'AI di rfactor è abbastanza pessima secondo me...

Edited October 8, 2013 by fillo01

[pierluigite]

gtr2 è il migliore, senza ombra di dubbio. Con i vari mod diventa insuperabile, è il gioco di riferimento. Rfactor è buono, ma inferiore; lo stesso vale per Gtr Evolution. A me piace moltissimo GT Legends, un vero must

[Guest Uff]

Rfactor è buono, ma inferiore

Dipende tutto da cosa cerchi: se ti piacciono le ruote scoperte allora rFactor è sicuramente più avanti rispetto a GTR2.

[Vaillant]

A me piace moltissimo GT Legends, un vero must

Beh anche a me, ma sentire nel bel pieno della curva il FFB che se ne va in ferie ......

[oppolo]

 

A me piace moltissimo GT Legends, un vero must

Beh anche a me, ma sentire nel bel pieno della curva il FFB che se ne va in ferie ......

 

l ffb e' modificabile, prova un po' questo.

 

piu' che altro sono i freni che non frenano niente, pedale freno a tavoletta e dimentica, ho dovuto modificarmi i freni di tutte le macchine

 

FFB Device Type="7" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.

FFB Effects Level="2" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.

FFB Gain="0.97000" // Strength of Force Feedback effects.  Range 0.0 to 1.0.

FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.

FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.

FFB steer vibe freq mult="0.50000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.

FFB steer vibe zero magnitude="0.00000" // Magnitude of steering vibration at 0mph (reference point).

FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).

FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.

FFB steer force average weight="0.90000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.

FFB steer force exponent="0.75000" // Steering force output "sensitivity".  Range 0.0 to infinity.  0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.

FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).

FFB steer force output max="2.00000" // Maximum force output of steering force, recommendation 0.8 to 2.0

FFB steer force grip weight="0.40000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9.  How much weight is given to tire grip when calculating steering force.

FFB steer force grip factor="0.40000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6.  How much of a factor the front wheel grip is on the steering weight.

FFB steer update thresh="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.

FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction.  Range: -1.0 to 1.0

FFB steer friction saturation="1.00000" // Saturation value to use for steering friction.  Range: 0 - 1.0

FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper.  Range: -1.0 to 1.0

FFB steer damper saturation="1.00000" // Saturation value to use for steering damper.  Range: 0 - 1.0

FFB throttle vibe freq mult="0.25000" // Scales actual engine frequency to force FFB vibration frequency.  Suggested range: 0.10 to 0.50

FFB throttle vibe zero magnitude="0.00000" // Magnitude of engine vibration at 0rpm (reference point).

FFB throttle vibe slope="-2.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).

FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.

FFB throttle vibe update thresh="0.02000" // Amount of change required to update throttle vibe (0.0 - 1.0)

FFB brake vibe freq mult="0.00000" // Scales actual brake rotational frequency to force feedback vibration frequency.

FFB brake vibe zero magnitude="0.00000" // Magnitude of brake vibration at 0mph (reference point).

FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).

FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.

FFB brake vibe update thresh="0.02000" // Amount of change required to update brake vibe (0.0 to 1.0)

FFB rumble strip magnitude="0.35000" // How strong the rumble strip rumble is.  Range 0.0 to 1.0, 0.0 disables effect.

FFB rumble strip freq mult="0.50000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.

FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.

FFB rumble strip pull factor="-0.70199" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.

FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0)

FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are.  Suggested Range: -2.0 to 2.0.

Edited October 9, 2013 by oppolo