Guest redwing2005 Posted August 31, 2005 Posted August 31, 2005 A prima vista, senza far casini, mi pare un mod di F1CH... calma... Lo sto provando sul portatile, quindi gira liscio a 800x600 senza filtri etc etc... quindi dipenderà molto dalla potenza di PC e scheda grafica. Uguale in tutto e per tutto, dal punto di vista della guida, alla demo rilasciata. Pochi i circuiti, insoddisfacenti, come sempre gli ISI hanno pensato ai modders che faranno ( gratis ) il successo di questo simulatore. Le auto... si poteva fare meglio ma le salveranno i modders... Sembra un gran titolo ma qui più che mai la differenza la farà il pc e la scheda. Spero di sbagliarmi.
Guest RobyXit Posted August 31, 2005 Posted August 31, 2005 lol ma te sei fuso.. rF uguale a f1 ch ...nemmeno la demo di un anno fà gli somigliava
Guest Demolition_Man Posted August 31, 2005 Posted August 31, 2005 Io dico solo: AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH, estasi pura!
Guest redwing2005 Posted August 31, 2005 Posted August 31, 2005 In poche parole ne vale la pena o no? 249027[/snapback] Dal momento che per qualche anno sarà il riferimento ne vale la pena, ma non è quella cosa che farà dimenticare gli altri, mi sento di dire che per sfruttarlo APPIENO serve il pc Ninja. E' chiaro che adesso siano tutti esaltati, ma bisogna aspettare almeno 1 settimana. Ora speriamo nei modders
Guest redwing2005 Posted August 31, 2005 Posted August 31, 2005 //V-10 F1 type Engine. 900HP @18,500 RPM RPMTorque=( 0, -35.0, -35.0) RPMTorque=( 500, -36.0, -24.1) RPMTorque=( 1000, -37.0, -8.7) RPMTorque=( 1500, -38.5, 56.3) RPMTorque=( 2000, -40.0, 98.6) RPMTorque=( 2500, -41.6, 107.1) RPMTorque=( 3000, -43.3, 116.0) RPMTorque=( 3500, -45.2, 137.9) RPMTorque=( 4000, -46.9, 178.4) RPMTorque=( 4500, -48.7, 199.3) RPMTorque=( 5000, -51.5, 215.6) RPMTorque=( 5500, -54.4, 228.0) RPMTorque=( 6000, -57.2, 239.1) RPMTorque=( 6500, -59.8, 250.2) RPMTorque=( 7000, -62.5, 259.1) RPMTorque=( 7500, -65.5, 269.7) RPMTorque=( 8000, -67.9, 275.6) RPMTorque=( 8500, -70.7, 286.8) RPMTorque=( 9000, -73.5, 294.4) RPMTorque=( 9500, -76.4, 305.3) RPMTorque=(10000, -79.3, 312.0) RPMTorque=(10500, -83.3, 317.9) RPMTorque=(11000, -86.5, 325.9) RPMTorque=(11500, -90.3, 334.3) RPMTorque=(12000, -93.4, 340.6) RPMTorque=(12500, -96.5, 344.2) RPMTorque=(13000, -100.8, 347.8) RPMTorque=(13500, -103.7, 351.1) RPMTorque=(14000, -107.8, 353.6) RPMTorque=(14500, -111.9, 360.4) RPMTorque=(15000, -116.3, 365.0) RPMTorque=(15500, -120.3, 373.9) RPMTorque=(16000, -124.7, 375.0) RPMTorque=(16500, -128.9, 370.8) RPMTorque=(17000, -133.3, 364.4) RPMTorque=(17500, -136.9, 358.2) RPMTorque=(18000, -141.2, 353.2) RPMTorque=(18500, -145.5, 347.1) RPMTorque=(19000, -149.9, 310.6) RPMTorque=(19500, -154.6, 201.6) RPMTorque=(20000, -161.3, 140.5) RPMTorque=(20500, -167.7, 60.6) RPMTorque=(21000, -177.0, -46.8) RPMTorque=(21500, -192.0, -111.6) RPMTorque=(22000, -211.1, -177.4) RPMTorque=(22500, -266.1, -236.4) RPMTorque=(23000, -345.9, -294.3) FuelConsumption=3.300e-005 // affected by throttle position and engine speed FuelEstimate=1.745 // fudge factor for differences between vehicle types (used for lap estimates and AI pit scheduling) EngineInertia=0.0575 // rotational inertia of engine components IdleThrottle=1.0 // throttle multiplier to help maintain idle speed IdleRPMLogic=(3900.0, 4100.0) // attempt to maintain idle speed between these RPMs LaunchEfficiency=0.000 // efficiency (0.0-1.0) of launch control, or 0.0 if N/A LaunchRPMLogic=(7500.0, 10500.0) // holds RPM in this range before launch (used for AI even if launch control is N/A!) RevLimitRange=(18500.0, 100.0, 11) RevLimitSetting=5 RevLimitLogic=150.0 // RPM range around current setting where rev limiter operates RevLimitAvailable=1 // whether to use a rev limit (if 0, you still must have a "rev limit", just make it 40000 or so, and make sure to change [CONTROLS]->UpshiftAlgorithm to fix shifting points) EngineMapRange=(0, 1, 5) // 0 = most driveable, max = most power (low gears only) (unimplemented) EngineMapSetting=2 EngineBrakingMapRange=(0.0, 0.000133, 5) // input throttle is ranged from minimum to 100%, with the minimum = setting * step * RPM, EngineBrakingMapSetting=2 // the default is 1 * 0.000133 * 15000 RPM = 2% applied throttle at zero input throttle OptimumOilTemp=105.0 // degrees Celsius at which engine operates optimally CombustionHeat=30.0 // degrees Celsius added per liter of fuel burned EngineSpeedHeat=7.400e-004 // heat added linearly with engine speed OilMinimumCooling=9.100e-004 // heat dissipated without radiator OilWaterHeatTransfer=(5.500e-003,9.050e-005) // heat transfer from oil to water (base, w/ engine speed) WaterMinimumCooling=3.900e-003 // heat dissipated without radiator RadiatorCooling=(3.00e-004, 1.060e-004) // cooling rate with velocity (base, per setting) LifetimeEngineRPM=(18000.0,360.0) // (base engine speed for lifetime, range where lifetime is halved) LifetimeOilTemp=(124.0,2.90) // (base oil temp for lifetime, range where lifetime is halved) LifetimeAvg=10050 // average lifetime in seconds LifetimeVar=3650 // lifetime random variance EngineEmission=(0.0, 0.50, 0.0) // where flames and smoke are emitted (relative to ref frame at rear axle) EngineSound=(0.0, 0.50, 0.0) // where engine sound is played (relative to ref frame at rear axle) SpeedLimiter=1 // whether vehicle has a pitlane speed limiter OnboardStarter=1 // whether vehicle restarts when stalled StarterTiming=(1.4, 0.4, 2.5) // average and variable cranking time, then time to blend with starting sound Si possono mettere come si vuole...
Guest Austin Posted August 31, 2005 Posted August 31, 2005 //V-10 F1 type Engine. 900HP @18,500 RPM RPMTorque=( 0, -35.0, -35.0) RPMTorque=( 500, -36.0, -24.1) RPMTorque=( 1000, -37.0, -8.7) RPMTorque=( 1500, -38.5, 56.3) RPMTorque=( 2000, -40.0, 98.6) RPMTorque=( 2500, -41.6, 107.1) RPMTorque=( 3000, -43.3, 116.0) ......................................... Si possono mettere come si vuole... 249034[/snapback] Boh questo e' uguale a f1 ch ..che devo pensare...?
Guest RobyXit Posted August 31, 2005 Posted August 31, 2005 //V-10 F1 type Engine. 900HP @18,500 RPM RPMTorque=( 0, -35.0, -35.0) RPMTorque=( 500, -36.0, -24.1) RPMTorque=( 1000, -37.0, -8.7) RPMTorque=( 1500, -38.5, 56.3) RPMTorque=( 2000, -40.0, 98.6) RPMTorque=( 2500, -41.6, 107.1) RPMTorque=( 3000, -43.3, 116.0) ......................................... Si possono mettere come si vuole... 249034[/snapback] Boh questo e' uguale a f1 ch ..che devo pensare...? 249037[/snapback] non devi pensare.. COMPRALO!!!! .. solo la demo 0.70 di un'anno fà vale 34 euri!!
Thor^DRM Posted August 31, 2005 Posted August 31, 2005 //V-10 F1 type Engine. 900HP @18,500 RPM RPMTorque=( 0, -35.0, -35.0) RPMTorque=( 500, -36.0, -24.1) RPMTorque=( 1000, -37.0, -8.7) RPMTorque=( 1500, -38.5, 56.3) RPMTorque=( 2000, -40.0, 98.6) RPMTorque=( 2500, -41.6, 107.1) RPMTorque=( 3000, -43.3, 116.0) ......................................... Si possono mettere come si vuole... 249034[/snapback] Boh questo e' uguale a f1 ch ..che devo pensare...? 249037[/snapback] ...che sono gli stessi sviluppatori...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now