I do not have a picture, I hear engine revs

[Guest lukchw]

Hi,

I am new to NetKar pro.

Downloaded demo yesterday and install the software.

I am using Pioneer Kuro 6090 screen. Set up the grophics to 1920x1080 32b 60Hz.

Hardware: GTX 590, 2600K, Asus P8Z68-pro, WIn 7 64, Frex wheel

When I enter offine test, I select drive and I can only see a black screen..... no pits, no car, no track. The strange thing is I can hear the sound of the engine reacting to my throtlle.

Can anyone help me? I rally wan to buy full version, but first I'd like to drive a lap or two.

ANOTHER PROBLEM I noticed

I am using FREX simwheel. After calibration..... WHen the wheel is in center position the "green calibration column" shows it turns right slightly. I can center the calibration column but i have to turn left a bit in order to do so?

How can I properly calibrate the wheel

Those are my problems. Hopefully someone can help.

Thank you for any help.

Regards,

Lukasz Chwastek

[Wally]

wheel calibration: center your physical Frex wheel when you're on track and press the Ctrl key to centre the wheel in-game.

[Guest lukchw]

Thank you Wally.

I have found a solution to the black screen.

I am using two monitors at the same time : 60'' pionner plasna and 19' samsung.

When I disconnect one of them everything is ok. So the solution is USE JUST ONE MONIOR AT a time

Thank you for your help.

[Guest PeterN]

The problem with the second monitor still exist

[Guest sylbal]

Hi there,

I had the same screen problem and solved it.

The first, the monitor i want to use is defined as the 'main one' from the nvidia config tool (a star should indicate the main monitor)

Then i had to update the menu entry property of netKar to tell it to use WinXP-sp3 compatibility and ticked the 3 last boxes on the same tab : desactivate theme, desactivate desktop composite, desactivate scaling for high resolution (that might not be the exact translation as i have it in french).

Hope this help

-sb