BWPACTH

[Stex68]

Ciao,

ho installato la bwpatch e volevo sapere se la mia installazione è corretta.

Il mio intento è di avere n°6 vetture visibili (4 davanti e 2 dietro).

Io gioco sia in rete tramite WinVROC sia con collegamento modem-modem con un mio amico, pertanto a volte faccio da host e altre volte faccio da client.

Ho variato il core.ini nel seguente modo:

[ Communications ]

alternate_ip_addr_lookup = 0 ; Find IP addresses another way

bcast_augment_status = 0 ; Prepend status with IP address?

bcast_listserv = ; IP address of race list server

bcast_listserv_req = ; Empty string, or start with '?'

bcast_listserv_req_freq = 10.000000 ; Request race list frequency

bcast_ping_disable = 0 ; Disable response to pings

bcast_ping_port = 0 ; Ping port number (0=default)

bcast_port = 0 ; Broadcast port number (0=default)

bcast_recv_disable = 0 ; Disable broadcast reception

bcast_send_disable = 0 ; Disable sending broadcasts

bcast_send_freq = 4.000000 ; Broadcast frequency (seconds)

clock_adj_delay = 4 ; How often may client adjust clock?

disable_ipx = 0 ; Disable IPX support

disable_modem = 0 ; Don't look for/use modems

disable_network = 0 ; Disable network support

disable_tcp_ip = 0 ; Disable TCP/IP support

ignore_net_read_errors = 1 ; Don't disco if error reading pkt

ignore_net_send_errors = 1 ; Don't disco if error sending pkt

ip_addr_lookup_timeout = 2 ; Timeout to find own IP address

log_server_comm_errors = 0 ; Log errors for client channels?

log_server_connect_status = 0 ; Issue messages as clients connect

mem_client_send_every = 1 ; Client packet freq via memory

mem_client_send_size = 276 ; Client packet size via memory

mem_server_send_every = 1 ; Server packet freq via memory

mem_server_send_size = 516 ; Server packet size via memory

net_lan_client_send_every = 3 ; Client packet freq on LAN

net_lan_client_send_size = 86 ; Client packet size on LAN

net_lan_server_send_every = 3 ; Server packet freq on LAN

net_lan_server_send_size = 100 ; Server packet size on LAN

net_mdm_client_send_every = 3 ; Client packet freq on dialup

net_mdm_client_send_size = 86 ; Client packet size on dialup

net_mdm_server_send_every = 3 ; Server packet freq on dialup

net_mdm_server_send_size = 100 ; Server packet size on dialup

net_server_port = 0 ; Server port number (0 = default)

net_use_mdm_bandwidth_for_tcp_ip = 1 ; Use modem bandwidthfor TCP/IP

Ho apportato le modifiche sopra indicate in neretto dopo aver letto il file bw_server.txt al punto n°4 e al punto 6

----------------------------------------------------------------------------------------

4. In core.ini set:

[ Communications ]

net_mdm_client_send_every = 3

net_mdm_client_send_size = 84

net_mdm_server_send_every = 3

net_mdm_server_send_size = 100 ; show 6 cars (4/2)

net_use_mdm_bandwidth_for_tcp_ip = 1

The 100 (show 6 cars) is an example.

6. If you have selected cars behind patch method 1, in core.ini set:

[ Communications ]

net_lan_client_send_size = 86 ; 84 + #cars shown behind

The 86 is an example. It will make GPL show 2 cars behind.

----------------------------------------------------------------------------------------

e in seguito ho lanciato il file bwpacth

digitato 1,

digitato 2 e digitato 1.Fixed,cars behind taken fron core.ini

E' tutto OK o ho sbagliato qualcosa ???

Grazie di tutto!!

Ciao

Stex68

[Schummy1]

Dovrebbe essere tutto ok... Il problema è che se entri come client in un server anche il server deve avere la patch installata sennò non funziona.