teolera Posted October 3, 2004 Posted October 3, 2004 Ciao a tutti!! Possiedo un volante Logitech,modello Wingman Formula Force GP con force feedback... qual è la configurazione migliore x questo volante x giocare con F1 Challenge? Grazie in anticipo.
Gilles Posted October 5, 2004 Posted October 5, 2004 Ciao caro. Ci sono due thread dove si parla ampiamente di settaggi http://www.drivingitalia.net/forum/index.php?showtopic=13594 http://www.drivingitalia.net/forum/index.php?showtopic=13594 Purtroppo i vari settaggi vertono su altri modelli Logitech, ma dovrebbero andar bene anche sul tuo
teolera Posted October 5, 2004 Author Posted October 5, 2004 Ok darò un'occhiata agli altri thread. Grazie mille!!
Guest Manesk Posted October 5, 2004 Posted October 5, 2004 Io ho il tuo stesso volante. Se ti puo' interessare qui trovi i settaggi del mio *.plr: [ Controls ] Keyboard Steering="0.20000" Keyboard Throttle="0.50000" Keyboard Brake="0.50000" Keyboard Clutch="0.20000" Force Feedback="0" Mimic Steering="1" // Mimic AI or pitlane assistance with force feedback Gear Select Button Hold="0" // Enable this option if using a gear select device that holds down a joystick button while in a gear and releases all buttons in neutral (such as the Act-Labs USB Shifter) Alternate Rearlook Activation="1" // if left look and right look are both pressed, rearlook becomes activated VFX-3D Head Tracking="0" // Enable this option if you have a VFX-3D HMD and you want to enable head tracking (VFX driver v. 2.6 must be installed) HMD Pitch Exponent="1.00000" // Exponent to apply to pitch tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster. HMD Yaw Exponent="1.00000" // Exponent to apply to yaw tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster. HMD Roll Exponent="1.00000" // Exponent to apply to roll tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster. Options Num Controls="26" // Number of configurable controls displayed in options Axis [00, 00] Dead Zone="0.05000" // Controller 1 X Axis [00, 00] Sensitivity="0.50000" Axis [00, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues) Axis [00, 01] Dead Zone="0.05000" // Controller 1 Y Axis [00, 01] Sensitivity="0.50000" Axis [00, 01] Center="0.50000" Axis [00, 02] Dead Zone="0.05000" // Controller 1 Z Axis [00, 02] Sensitivity="0.50000" Axis [00, 02] Center="0.50000" Axis [00, 03] Dead Zone="0.05000" // Controller 1 RX Axis [00, 03] Sensitivity="0.50000" Axis [00, 03] Center="0.50000" Axis [00, 04] Dead Zone="0.05000" // Controller 1 RY Axis [00, 04] Sensitivity="0.50000" Axis [00, 04] Center="0.50000" Axis [00, 05] Dead Zone="0.05000" // Controller 1 RZ Axis [00, 05] Sensitivity="0.50000" Axis [00, 05] Center="0.50000" Axis [00, 06] Dead Zone="0.05000" // Controller 1 S0 Axis [00, 06] Sensitivity="0.50000" Axis [00, 06] Center="0.50000" Axis [00, 07] Dead Zone="0.05000" // Controller 1 S1 Axis [00, 07] Sensitivity="0.50000" Axis [00, 07] Center="0.50000" Axis [01, 00] Dead Zone="0.05000" // Controller 2 X Axis [01, 00] Sensitivity="0.50000" Axis [01, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues) Axis [01, 01] Dead Zone="0.05000" // Controller 2 Y Axis [01, 01] Sensitivity="0.50000" Axis [01, 01] Center="0.50000" Axis [01, 02] Dead Zone="0.05000" // Controller 2 Z Axis [01, 02] Sensitivity="0.50000" Axis [01, 02] Center="0.50000" Axis [01, 03] Dead Zone="0.05000" // Controller 2 RX Axis [01, 03] Sensitivity="0.50000" Axis [01, 03] Center="0.50000" Axis [01, 04] Dead Zone="0.05000" // Controller 2 RY Axis [01, 04] Sensitivity="0.50000" Axis [01, 04] Center="0.50000" Axis [01, 05] Dead Zone="0.05000" // Controller 2 RZ Axis [01, 05] Sensitivity="0.50000" Axis [01, 05] Center="0.50000" Axis [01, 06] Dead Zone="0.05000" // Controller 2 S0 Axis [01, 06] Sensitivity="0.50000" Axis [01, 06] Center="0.50000" Axis [01, 07] Dead Zone="0.05000" // Controller 2 S1 Axis [01, 07] Sensitivity="0.50000" Axis [01, 07] Center="0.50000" Control - Accelerate="(1, 4)" Control - Brake="(1, 12)" Control - Steer Left="(1, 2)" Control - Steer Right="(1, 1)" Control - Shift Up="(1, 14)" Control - Shift Down="(1, 13)" Control - Neutral="(0, 89)" Control - Reverse Gear="(0, 89)" Control - First Gear="(0, 89)" Control - Second Gear="(0, 89)" Control - Third Gear="(0, 89)" Control - Fourth Gear="(0, 89)" Control - Fifth Gear="(0, 89)" Control - Sixth Gear="(0, 89)" Control - Seventh Gear="(0, 89)" Control - Clutch In="(0, 16)" Control - Display Mode="(0, 28)" Control - Pit Request="(0, 31)" Control - Pit Menu Up="(0, 200)" Control - Pit Menu Down="(0, 208)" Control - Pit Menu Inc="(0, 205)" Control - Pit Menu Dec="(0, 203)" Control - TCOverride="(0, 24)" Control - Launch Control="(0, 53)" Control - Speed Limiter="(1, 18)" Control - Bias Forward="(0, 26)" Control - Bias Rearward="(0, 27)" Control - Look Left="(1, 15)" Control - Look Right="(1, 16)" Control - Rear Look="(0, 48)" Control - Instant Replay="(0, 19)" Control - Pause="(0, 25)" Control - Restart Race="(0, 21)" Control - Zero HMD="(0, 89)" Control - Display Vehicle Labels="(0, 15)" Control - Ignition="(0, 89)" Control - Starter="(0, 89)" Control - Horn="(0, 89)" Control - Headlights="(0, 89)" Control - Handbrake="(0, 89)" Control - Look Up="(0, 89)" Control - Look Down="(0, 89)" Control - Look Roll Left="(0, 89)" Control - Look Roll Right="(0, 89)" FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.50000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.03545" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force average weight="0.60000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency. FFB steer force exponent="0.80000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="1.80000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip weight="0.90000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer update thresh="0.01500" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.17500" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.17500" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.17000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.08977" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.08000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.10000" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.05000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.35000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="0.60000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-1.50909" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0. FFB Joy[00] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[01] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[01] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[02] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[02] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[03] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[03] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[04] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[04] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[05] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[05] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[06] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[06] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[07] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[07] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring Nel pannello di controllo Logitech ho questi settaggi (per il profilo F1ch): globale 100%, molla 100%, ammortizzatore 0%, pedali non combinati.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now