bi555 Posted February 16, 2006 Share Posted February 16, 2006 ciao a tutti sto cercando le migliori impostazioni di plr per il FF ora uso quelle di gilles per F1CH, GTR e GTL ma non sono quello che sto cercando. Ho ancora (trovo) poca sensazione di grip in curva e del posteriore nonch Link to comment Share on other sites More sharing options...
Guest Ubaldo Posted February 16, 2006 Share Posted February 16, 2006 Prima di tutto Link to comment Share on other sites More sharing options...
bi555 Posted February 16, 2006 Author Share Posted February 16, 2006 (edited) intanto posto i parametri di gilles che dovrebbero essere al momento il punto di riferimento: FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="0.60000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.64091" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.15273" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force average weight="0.90000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency. FFB steer force exponent="0.75227" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11000.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="2.10000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip weight="0.98000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer force grip factor="0.60000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6. How much of a factor the front wheel grip is on the steering weight. FFB steer update thresh="0.00800" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.05000" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.17000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.06023" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.07000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.70000" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.07000" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="1" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.04000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.35000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="0.70000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-1.80000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.06000" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0. FFB Joy[00] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[01] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[01] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[02] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[02] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[03] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[03] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[04] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[04] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[05] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[05] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[06] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[06] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[07] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[07] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[00] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[00] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[01] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[01] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[02] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[02] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[03] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[03] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[04] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[04] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[05] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[05] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[06] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[06] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[07] Spring Coefficient Pos="0.50000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[07] Spring Coefficient Neg="0.50000" // DirectInput Coefficient to use for spring Edited February 17, 2006 by bi555 Link to comment Share on other sites More sharing options...
Guest Ubaldo Posted February 16, 2006 Share Posted February 16, 2006 (edited) elimina tutte le righe che stanno sopra questa: FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. Cos Edited February 16, 2006 by Ubaldo Link to comment Share on other sites More sharing options...
bi555 Posted February 17, 2006 Author Share Posted February 17, 2006 elimina tutte le righe che stanno sopra questa: FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. Cos Link to comment Share on other sites More sharing options...
Guest Ubaldo Posted February 17, 2006 Share Posted February 17, 2006 Lacune a dire il vero nessuna. Nel senso che mi ci sono abituato e mi trovo bene con quei valori. Dai un'occhiata anche qui: http://www.funleague.net/forum/showthread.php?t=36 Link to comment Share on other sites More sharing options...
bi555 Posted February 18, 2006 Author Share Posted February 18, 2006 (edited) allora tanto per partire: dal pannello di controllo windows periferiche di gioco per GTL uso: pedali separati FF strenght 100% molla1 e molla2 5% molla di centratura attivata ma a 0% gradi di rotazione 540 che ne dite? Lacune a dire il vero nessuna. Nel senso che mi ci sono abituato e mi trovo bene con quei valori. Dai un'occhiata anche qui: http://www.funleague.net/forum/showthread.php?t=36 ad esempio quelle enormi vibrazioni sullo sterzo in rettilineo quando lo sterzo Edited February 18, 2006 by bi555 Link to comment Share on other sites More sharing options...
Guest Ubaldo Posted February 18, 2006 Share Posted February 18, 2006 allora tanto per partire: dal pannello di controllo windows periferiche di gioco per GTL uso: pedali separati FF strenght 100% molla1 e molla2 5% molla di centratura attivata ma a 0% gradi di rotazione 540 che ne dite? Lacune a dire il vero nessuna. Nel senso che mi ci sono abituato e mi trovo bene con quei valori. Dai un'occhiata anche qui: http://www.funleague.net/forum/showthread.php?t=36 ad esempio quelle enormi vibrazioni sullo sterzo in rettilineo quando lo sterzo Link to comment Share on other sites More sharing options...
Guest Joseph Manters Posted February 19, 2006 Share Posted February 19, 2006 Anche io sto testando da qualche giorno i valori di Gilles (che ovviamente ringrazio ) Solo che devo essere masochista... a differenza vostra io ho questi valori impostati: pannello winzozz FF strenght: 100% Molla 1: 80% Molla 2: 90% molla di centratura disattivata ma impostata al 98% assi pedali separati (ovviamente) gradi di rotazione: 543 (non riesco ad impostare 540 secchi... mah!?!) Se non erro, questi erano i valori consigliati da Aris per il momo force (o racing). Per Link to comment Share on other sites More sharing options...
bi555 Posted February 19, 2006 Author Share Posted February 19, 2006 Anche io sto testando da qualche giorno i valori di Gilles (che ovviamente ringrazio ) Solo che devo essere masochista... a differenza vostra io ho questi valori impostati: pannello winzozz FF strenght: 100% Molla 1: 80% Molla 2: 90% molla di centratura disattivata ma impostata al 98% assi pedali separati (ovviamente) gradi di rotazione: 543 (non riesco ad impostare 540 secchi... mah!?!) Se non erro, questi erano i valori consigliati da Aris per il momo force (o racing). Per Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now