Jump to content

Benvenuto nel Simracing Esport: registrati subito!

Dal 1999, la più importante e seguita community di appassionati di simulatori di guida

Sign in to follow this  
VELOCIPEDE

Assetto Corsa Competizione: consigli e setup per volanti/pedaliere e force feedback

Recommended Posts

VELOCIPEDE

Assetto Corsa Competizione (PC) - Fanatec Recommended Settings

General Notes:
- The settings below are considered to be reasonable baseline values for Assetto Corsa Competizione (PC). They might not suit all tastes and driving styles, but they are a good starting point.
- The software is in an 'Early Access' beta, so controller settings are not final.
- In order to apply the suggested settings correctly, it is important to assign both the Tuning Menu values AND the suggested In-Game settings together.
- For the Podium Series settings, it is assumed that the Torque Key is being used.
- In order to make use of the Multi-Position Switches of the CSL Elite Steering Wheel McLaren GT3 and ClubSport Steering Wheel F1 2018 / Formula V2 wheels, the base needs to be in V2.5 Compatibility Mode and the 'McLaren GT3' preset needs to be loaded in the ACC controller menu.
- Please ensure you are using the latest wheel base firmware.
 
Podium Wheel Base DD1 / Podium Racing Wheel F1® PS4™ (PC Mode or V2.5 Comp. Mode)

Tuning Menu Settings:
SEN 1080 (shown as 108 on some displays)
FF 38
SHO 100
ABS User Preference
FOR 100
SPR 100*
DPR 100
NDP 10
NFR 5
BRF User Preference
FEI 100
MPS Const.

*SPR and DPR values have no effect.

In-Game Settings:
Steer lock: 1080
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0
 
 
Podium Wheel Base DD2 (PC Mode or V2.5 Comp. Mode)
 
Tuning Menu Settings:
SEN 1080 (shown as 108 on some displays)
FF 38
SHO 100
ABS User Preference
FOR 100
SPR 100*
DPR 100
NDP 10
NFR 5
BRF User Preference
FEI 100
MPS Const.
 
*SPR and DPR values have no effect.

In-Game Settings:
Steer lock: 1080
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0
 
 
ClubSport Wheel Base V2

Tuning Menu Settings:
SEN 900
FF 100
SHO 100
ABS User Preference
DRI 003
FOR 100
SPR 100*
DPR 100*
BRF User Preference

*SPR and DPR values have no effect.

In-Game Settings:
Steer lock: 900
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0
 
 
ClubSport Wheel Base V2.5
 
Tuning Menu Settings:
SEN 900
FF 100
SHO 100
ABS User Preference
DRI -01
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 100

*SPR and DPR values have no effect.

In-Game Settings:
Steer lock: 900
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0
 
 
CSL Elite Wheel Base

Tuning Menu Settings:
SEN 1080 (shown as 108 on some displays)
FF 100
SHO 100
ABS User Preference
DRI 003
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 100

*SPR and DPR values have no effect.

In-Game Settings:
Steer lock: 900
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0
 
 
CSL Elite Wheel Base + / CSL Elite Racing Wheel PS4™

Tuning Menu Settings:
SEN 1080 (shown as 108 on some displays)
FF 100
SHO 100
ABS User Preference
DRI -02
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 070

*SPR and DPR values have no effect.

In-Game Settings:
Steer lock: 900
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0

Share this post


Link to post
Share on other sites
VELOCIPEDE

Ci vogliamo godere in Assetto Corsa ed Assetto Corsa Competizione un force feedback sul nostro volante quasi perfetto, più pulito e dettagliato? Non dobbiamo fare altro che utilizzare l'utility LUT Generator in combinazione con l'app WheelCheck. Si tratta in sostanza di due strumenti che, utilizzati in combinazione, producono una tabella dedicata al feedback ottimale, per correggere il comportamento non lineare dei motori situati nei nostri volanti, in particolare quelli di fascia bassa e media.

Per discussioni in merito fate riferimento a questo topic per AC Competizione ed a quest'altro per Assetto Corsa. Ringraziamo @thecure per l'utilissimo video!

  QUOTE

How to use:

  1. Run WheelCheck 
  2. "Max Count" should be at least 50 in box. Lower values work, but 50 or even 100 give better results.
  3. Select "Step Log 2 (linear force test)" and wait until the test stops.
  4. Extract LUTGenerator.zip you've just downloaded wherever you want and run LUTGenerator.exe
  5. Open the csv that was just generated by WheelCheck.
  6. Save the generated LUT in My Documents\Assetto Corsa\cfg\ folder, eg myLUT.lut
  7. Open ff_post_process.ini located in My Documents\Assetto Corsa\cfg\ and make sure the TYPE=LUT, ENABLED=1 and CURVE = Generated LUT filename
  8. MIN FORCE should be set to 0 in Assetto Corsa!!

 

Share this post


Link to post
Share on other sites
Caterpillar

Acc non usa gli stessi nomi per cartelle e files, come implemento il lut?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.