[PS4] CSL Elite Racing Wheel by Fanatec - Volanti - Wheel - DrivingItalia.NET simulatori di guida Jump to content

[PS4] CSL Elite Racing Wheel by Fanatec


VELOCIPEDE

Recommended Posts

 

Riassumiamo in un singolo post tutti i punti toccati durante la nostra videorecensione, nel caso non abbiate il tempo di guardarla per intero.

ITA
CSL P1

  • All'inizio, i materiali usati sembravano un po' "economici" e le palette del cambio non sembravano essere rapide nella risposta

  • Usandola, tali impressioni sono sparite e la corona si è dimostrata perfetta da usare sia con auto GT che Formula; le palette hanno sempre funzionato a dovere

  • Il display è un'ottima aggiunta: ad un primo sguardo sembra una semplice aggiunta per far felice i simracer, in realtà è incredibilmente utile durante la guida in quanto permette di sapere sempre a che giri motore si è, anche guardandolo solo con la coda dell'occhio

  • Ci vuole un po' per abituarsi alla posizione dei pulsanti, in quanto non sono disposti in maniera simmetrica e si devono mettere le dita a due altezze differenti sui due lati

  • L'unico punto debole del rim è il materiale con cui è rivestita la corona: lascia sempre un senso di "attaccaticcio" sulle mani, soprattutto durante le giornate più calde. Sarebbe ottimo se Fanatec potesse rilasciare in futuro un rim simile, ma con un grip migliore (chiaramente ad un prezzo più alto)

  • Non è presente un sistema di quick release come accade invece sugli altri volanti Fanatec, ma l'aggancio si è dimostrato solido e questa soluzione è stata adottata nell'ottica di contenere i costi.

CSL Elite Pedals

  • Di base la pedaliera è venduta nella configurazione a due pedali. È possibile aggiungerne un terzo dotato di cella di carico

  • Questa volta sono presenti dei potenziometri al posti di sensori magnetici o di hall

  • I potenziometri hanno una risoluzione di 12 bit, la cella di carico di 16 bit

  • La maggiore risoluzione può essere apprezzata chiaramente nei software di calibrazione come DiView

  • Durante la guida non sia ha un'idea chiara della maggiore risoluzione, ma si percepisce sempre una grande continuità nel movimento del pedale, cosa che rende la guida molto fluida e precisa

  • I pedali di base hanno molle con resistenza leggermente diversa

  • Utilizzando l'adattatore in poliuretano sul pedale del freno/frizione si può variare la durezza della pressione e simulare il rilascio della frizione

  • Il terzo pedale funziona ora interamente come cella di carico, non c'è più alcuna molla che poi preme sulla cella stessa

  • Usando diversi gommini distanziatori e il parametro brake force si possono ottenere molti diversi settaggi, perfetti per coloro che vogliano una corsa e una resistenza più o meno lunghe

  • Aggiustare la posizione dei pedali richiede sempre di rimuovere uno dei due ai lati, sarebbe stato più comodo permettere alle barre che li collegano di uscire lateralmente, ma è un problema minore

  • Il feeling sul pedale del freno è simile a quello che si ha dalla pressione del rispettivo pedale su di un'auto vera a motore spento, richiede un po' di tempo per abituarcisi, ma poi è veramente soddisfacente

  • Il nuovo driver offre la possibilità di regolare il minimo e il massimo della corsa per eliminare qualsiasi tipo di zona morta

  • Il piatto del pedale può essere cambiato, ma manca un supporto adeguato per il punta tacco

  • La soluzione a tre pedali potrebbe sembrare costosa, ma è realizzata interamente in metallo e vale il prezzo

CSL Elite Base

  • La base inizialmente sembrava un avversario per il T300, ma la stessa Fanatec ha affermato di puntare più alla fascia del T500

  • L'obiettivo è pienamente raggiunto e a nostro avviso addirittura superato

  • Dopo aver guidato sistemi di sterzo professionali che offrono molta precisione e forza, la CSL Base è il primo prodotto "commerciale" che dà un feeling simile

  • Quando si pensa che il FFB stia clippando, in realtà c'è ancora margine e questo rende la guida veramente appagante

  • Dopo aver testato la base con WheelCheck, possiamo affermare che non è presente zona morta

  • All'accensione c'è la tradizionale calibrazione, la base si avvia sempre in modalità XBox, ma questo è un limite imposto da Microsoft e passare alla modalità PC è veramente rapido

  • La base ha 1080 gradi di rotazione

  • È presente del rattling avvertibile in maniera chiara, qualcosa di insolito per un sistema a cinghia, ma è un problema minore

  • La base può essere configurata come da tradizione tramite le impostazioni settabili dalla corona

  • Di default, la base ha un feeling molto "elastico", qualcosa di simile al T300. Impostando il Drift Mode a 2 o 3, questa sensazione sparisce completamente ed è così che la base eccelle, offrendo un comportamento che non siamo riusciti ad ottenere con alcune basi della concorrenza

  • Se state pensando di aggiornare il vostro hardware, prendete in seria considerazione questa base in quanto dà l'impressione di essere veramente un nuovo inizio per i sistemi di sterso commerciali (ovvero quelli non professionali)

ENG
CSL P1

  • At first, the materials used seemed a little "cheap" and paddles didn't seem very reactive

  • Using it, those impressions went away and the rim proved to be perfect both for formula and GT cars; paddles always worked fine

  • The display is a great addition: at a first look it might seem as a simple addition to make the simracer happy, in reality it is incredibly useful while driving as you always know what rpm you're at, even when you barely look at it

  • It takes sometimes to get used to buttons position, as they're not simmetric and you need to put your fingers at a different height on the two sides

  • The only weak point in this rim is the material the grip is made of: it always leave a sense of "dirt" on your hands, especially during hot days. It would be great if Fanatec would release a similar rim with a better grip in the future (obviously at a higher cost)

  • There is no quick release like in the other Fanatec's rims, but the mounting is always solid and this is clearly needed to contain cost.

CSL Elite Pedals

  • By default the pedals are sold in the two-pedals configuration. It is possible to add the third pedal with a load cell

  • This time there are potentiometers instead of magnetic or hall sensors

  • Potentiometers have 12 bit resolution, load cell has 16 bit resolution

  • The higher resolution can be clearly seen with a calibration tool like DiView

  • While driving you don't get a clear idea of the higher resolution, but in general you feel a great continuity in the pedal movement, that makes the driving very fluid and precise

  • Default pedals have slightly different spring resistence

  • Using the foam you can make the clutch/break pedal harder to push and can simulate the clutch bite

  • The third pedal now works entirely as a load cell, there is no spring that then pushes on the load cell

  • Using different elastometers and brake force you can get a lot of different settings, perfect for those who want a longer or shorter travel and resistence

  • Adjusting pedals position always require to remove one of the two at the sides, it would have been nice to be able to adjust the position by letting the two bars exit from the sides, but it's a very minor problem

  • Brake feeling is similar to the one you get while pressing a real car brake pedal with engine off, it takes sometimes to get used, but after that it is really rewarding

  • The new driver also has a min/max settings that eliminates every possible deadzone

  • Pedal's plate can be changed, there is no good support for heel and toe

  • Three pedals solution might seem expensive, but it's a set fully made of metal and it is worth it

CSL Elite Base

  • The base at first seemed a competitor for T300, but as Fanatec says it aims at T500

  • That target is fully reached and is even better

  • After driving professional steering systems that offer a lot of precision and strenght, the CSL Base is the first "commercial" base that gives a similar feeling

  • When  you think the FFB is clipping, in reality there's still room and it makes the driving very satisfying

  • After testing the base with WheelCheck we saw there is no dead zone.

  • At power on there's the standard calibration process, it always starts in XBox mode, but that's a limitation required by Microsoft and switching to PC mode is really fast

  • The base has 1080 degrees of rotation

  • There is some noticeable rattling, something unusual for a belt driven system, but it's a minor issue

  • The base can be configured as usual with the settings on the rim

  • By default, the base has a very "elastic" feeling, something similar to T300. Setting Drift Mode to 2 or 3 that feeling completely disappear and makes the base really shine, something that we've never been able to reach with some competitors' bases.

  • If you're planning to upgrade your hardware, take in serious consideration this base as it feels almost like a new beginning for commercial (non professional) steering systems.

-----------------

 

La tedesca Fanatec annuncia il lancio della nuova linea di prodotti denominata CSL Elite Series, che comprende la CSL Elite Wheel Base con servo motore per i volanti (prezzo 319€) e la pedaliera in metallo CSL Elite Pedals LC (prezzo 219€). Qui di seguito tutti i dettagli.

CSL stands for „ClubSport Light“ and racing fans know that light is good. We essentially used the technology of the ClubSport series and concentrated on pure performance and durability rather than fancy materials or a the prefect finish you know from the ClubSport series.
Of course we also had to cut a few features but on the other side we also added a few innovative features which cannot be found anywhere else.

Therefore the CSL products are 100% Fanatec and state-of-the-art!
You can find the full description on our webshop or in the press release but here are the highlights of the new base and the new pedals. Both products are sold separately and of course they are compatible to most previous Fanatec equipment.

CSL Elite Wheel Base
- Super strong and fast brushless servo motor which delivers 6 NM on the steering axis
- Single belt drive unit with just one belt between axis and motor
- Automotive grade QR system and compatibility to all Fanatec CSL or ClubSport steering wheels
- 1080° of rotation. Good for drifting
- Rev Lights integrated on the base
- Strong table clamp integrated
- 2 shifter ports plus handbrake port. There are CSL Shifters and handbrake also coming up next

CSL Elite Pedals and CSL Elite Pedals Loadcell Kit
- Solid full metal construction
- Basic set comes with two pedals but with the optional Loadcell Kit you add a loadcell brake and transform the former brake pedal into a clutch pedal.
- Great brake feeling even on the basic set as it comes with a strong metal spring and a PU foam damper/spring
- The loadcell brake pedal is actually a big loadcell. The whole arm is the sensor and it measures pedal pressure of up to 90kg. Of Course you can adjust the brakeforce during gameplay.
- Travel and stiffness of the LC brake can be easily and quickly adjusted without the need of tools
- You can choose between 3 surfaces for your pedal plates. Blank metal, rubber or a sandpaper anti-skid patch

My team has worked a long time and very hard to bring those products to the market. I am very proud of them and also my thanks goes to the feedback of all testers and the community for telling us what you really want and need.

And finally a word to the PlayStation situation. We know that a lot of people want to know what the status is but we cannot announce anything before the contract is signed. We have a good relationship with Sony but we need to follow the rules and although there are absolutely no points of disagreement, sometimes things takes a while because of procedures and work flows. I am confident that we can announce a PS4 Version of this Wheel base soon.

 
1acf4fe68ced974fb7c993d7e1916c.jpg



This post has been promoted to an article

Link to comment
Share on other sites

  • Replies 462
  • Created
  • Last Reply

Top Posters In This Topic

  • Lele "NightRider" Albanes

    63

  • VELOCIPEDE

    58

  • Uff

    41

  • Tjetbenz

    20

Ho come l'impressione che questi 2 prodotti siano superiori alle controparti della linea Clubsport..  :doubt:

Oltretutto, per caratteristiche (sulla carta) e fascia di prezzo occupata, diverranno dei best buy in grado di sbriciolare Thrustmaster TX\T300\T3PA-pro che sono (più o meno) in quella stessa fascia di prezzo.

Edited by Filodream
Link to comment
Share on other sites

Interessante ma c'è da sapere di certezza che prezzi avranno. Se poi è in linea coi T300, come fascia di prezzo per blocco motore e parti come corone e pedaliere, allora sarà da capire l'affidabilità.

In effetti sono prodotti molto stuzzicanti.

Link to comment
Share on other sites

Ho come l'impressione che questi 2 prodotti siano superiori alle controparti della linea Clubsport..  :doubt:

Oltretutto, per caratteristiche (sulla carta) e fascia di prezzo occupata, diverranno dei best buy in grado di sbriciolare Thrustmaster TX\T300\T3PA-pro che sono (più o meno) in quella stessa fascia di prezzo.

La base punta ad essere meglio del CSW V1: a questo prezzo, ha davvero le caratteristiche per imporsi come l'entry level di riferimento (soprattutto pensando che ad un prezzo simile si trova il G29).

Link to comment
Share on other sites

Interessante ma c'è da sapere di certezza che prezzi avranno. Se poi è in linea coi T300, come fascia di prezzo per blocco motore e parti come corone e pedaliere, allora sarà da capire l'affidabilità.

In effetti sono prodotti molto stuzzicanti.

I prezzi sono già tutti indicati sul sito e nel primo post. :wink:

Link to comment
Share on other sites

Pedaliera presa, 246 euro spedita arrivo previsto 10/11/2016, mi ha convinto la possibilita' di metterla in posizione gt e la semplicita'.

 

Quando arriva vendo la v3 con il damper ed i gommini eladur di 1 anno, accetto prenotazioni...  :asd:

Link to comment
Share on other sites

Arriva proprio nel momento giusto io che ho appena venduto tutto rseat rs1 csw v2 pedaliera v2 e cambio Shifter SQ... Andro a rimontare sul trespolo ""Amen"" Giusto per divertirmi un po su AC e iRacing e ogni tanto anche su ETS2 che mi manca  :whistle:

L'unico scimmia sarà a livelli V2? in teoria monta lo stesso motore  :ave: Brushless  in pratica...  

CSL-WS-Big_05-1000x666.jpg  :ehhh:

Link to comment
Share on other sites

Pedaliera presa, 246 euro spedita arrivo previsto 10/11/2016, mi ha convinto la possibilita' di metterla in posizione gt e la semplicita'.

 

Quando arriva vendo la v3 con il damper ed i gommini eladur di 1 anno, accetto prenotazioni...  :asd:

 

Prenotata.

Certo dipende anche dal prezzo...ma sono primo della lista!

Link to comment
Share on other sites

Grazie Led appena arriva la nuova ti mando un pm non ti preoccupare ci mettiamo d'accordo saluti

 

Pedaliera presa, 246 euro spedita arrivo previsto 10/11/2016, mi ha convinto la possibilita' di metterla in posizione gt e la semplicita'.

 

Quando arriva vendo la v3 con il damper ed i gommini eladur di 1 anno, accetto prenotazioni...  :asd:

 

Prenotata.

Certo dipende anche dal prezzo...ma sono primo della lista!

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.