Jump to content

[AC] ProTyres (info dettagliate sulle gomme)


VELOCIPEDE

Recommended Posts

nel primo post

v1.2.0
- optional black & white color mode for buttons
- optionally bound pressure offsets from ideal target to current track (still temp based)
- optional fallback is now Temp (False), TempOnly (True), Track, TrackTemp or TrackOnly
- fix when changing compounds, sometimes wrong pressure offset was selected
- fix when selecting compound quick back to previous, selection could get stuck on 'n/a'
- fix for some mod cars compounds not reaching 100% wear, delaying the newtyre overlay behavior (one known)
- fix for non pitlane track configurations (example Nordschleife Tourist), tyre change not detected correct
- fix of non vital app loading error
- new init of lib, previous code was sometimes incompatible with some installations (russian confirmed)
- sim_info updated according to AC 1.13.2, warning if older version loaded by previous app and is not up to date
(python seems to share this info and if an older version is loaded before proTyres it could cause app to fail)
- if app not visible, no background activity (previous EOL calculations was always active)
- readme INI updated and protyres version added to py_log

No INI files in archive so no personal settings is overwritten

Link to comment
Share on other sites

  • Replies 22
  • Created
  • Last Reply

Top Posters In This Topic

  • VELOCIPEDE

    15

  • jakobdylan

    2

  • dom94

    2

  • MaoZeTung

    2

Top Posters In This Topic

Posted Images

ma questa applicazione funziona con le mod?

Link to comment
Share on other sites

No almeno che non siano state inserite nel database

Link to comment
Share on other sites

  • 2 weeks later...

v1.2.2 170511
- 1 to 7-point dynamic eol, improves estimated end of life (adapts automatically from previous 1-point format)
- fix if race is started on track and session is restarted, tyre laps/eol data was not reset correct
- fix for a few high wear compounds, sometimes eol could behave strange on 2nd run
- fix if km is reset on track messing up eol (example Nordschleife Tourist)
- fix for info eolgain, not so relevant value was shown, also shown in compact mode as well (if enabled)
- fix if tyre is overheated and out of lut range, gfx could sometimes freeze until cooldown within lut range
- pitpos is now not forced set if session changes but jump to pit does, improves new street tyre detection
- optional non verbose logging in console and pt_log.txt (only errors is shown)
- add debug info for pit position init

Link to comment
Share on other sites

v1.3.0 170518
- updated ini&lut files for all AC cars to version 1.14.0 (only a few has changed) and new RTR DLC
- fix for broken lut handling on a few cars (currently known Race Sim Studio)
- fix for broken session reset when km fix was applied
- fix when race end to practice session, sometimes current tyre set was not reset correct (not checked)
- fix for eol color bar & markers, was sometimes not on the correct position & color
- workaround for United Racing Design (URD) mod cars wrong parameter configuration, for it to detect tyre compound correct you need to click less than 1 click/second when changing from hard to soft, that due to missing info from the URD cars. change from/to hard to soft in a pitstop will not detect compound change, change from/to medium will work. compound soft(s) or hard (h) is not indicated in the app summary (or in the AC pitstop app as well)

no ini files in archive so no personal settings are overwritten

Link to comment
Share on other sites

  • 2 weeks later...

v1.3.1

- updated (new) ini&lut pack for AC 1.14.1, some cars was missing compound data in 1.14.0
- extended check for Nordschleife Tourist, depending on start pitbox sometimes km fix could be missed
- very little tweak eol gain calculation
- fix for forced visible even if deactivated in app selection bar, even if not activated app will need to init to keep correct behavior of pit/track condition

Link to comment
Share on other sites

  • 4 weeks later...

Ma è possibile farla funzionare con le mod aggiungendo i data di questi ultimi?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.