Setup volante, per un force feedback migliore... - Page 2 - Kart Racing Pro - DrivingItalia.NET simulatori di guida Jump to content

Setup volante, per un force feedback migliore...


VELOCIPEDE

Recommended Posts

hai creato un tuo profilo?! se non lo crei mi pare non faccia modificare alcuni parametri...

cmq io rettifico, con la beta2 ho un buon un FFb lasciando i valori di default, mentre con la beta1 c'era da gicoare con gli smooth, damping, ecc, come avevo scritto sopra...

Link to comment
Share on other sites

  • 2 years later...

It is important to correctly setup the steering wheel.
1 ) In the steering wheel profiler, disable the centering spring and damping, or at least let the software override them.
2 ) Take note of the rotation ( the suggested value is 180 ).
3 ) In Kart Racing Pro -> Settings -> Input -> Calibration, calibrate the steering wheel rotating it from lock to lock, and then leave it perfectly centered before pressing "Ok".
4 ) Click on the right of Controls -> Steer and steer LEFT to assign the control.
5 ) Under Advanced -> Steer, set deadzone to 0, linearity to 100 and leave smooth unchecked.
6 ) Enable force feedback and set strength to 100%, deadzone to 0% and linearity to 100%
7 ) Enable wheel rotation and set it directly or use the wizard. In both cases the value should match the rotation set in the profiler.
8 ) If you are experiencing vibration on straights, please try increasing force feedback deadzone in steps of 5. This shouldn't be needed on the Logitech G25 and G27.
9 ) If you feel the force in the center is a bit weak, you can try lowering the force feedback linearity.

Link to comment
Share on other sites

  • 1 year later...

Sto provando un po' la demo di KRP ma faccio fatica a ritrovarmi con lo sterzo: appurato che il kart ha di base 180° di rotazione (almeno a giudicare dalla rotazione a video), con il volante bastano davvero pochi gradi per farlo curvare, sino ad arrivare all'estremo che se si sterza un po' di più il kart quasi si gira su se stesso andando in testacoda.

Ho già effettuato tutta la procedura di calibrazione delle periferiche e infatti la barra gialla dello sterzo raggiunge il fine corsa nel momento in cui io lo raggiungo effettivamente con il mio volante; ho poi impostato 900 gradi come ho sul volante. È normale che sia così?

Link to comment
Share on other sites

  • 2 weeks later...
  • 5 years later...

Qualcuno è riuscito a far funzionare il fanatec csr con questo titolo? Su kartkraft funziona perfettamente ho comprato anche questo per valutare quale sia il migliore (premetto che io ho un kart vero e vado in pista)ma niente non riesco a fare funzionare la periferica, così sarò costretto a chiedere il rimborso. Acquisto fatto ieri su steam.  Grazie saluti.

Link to comment
Share on other sites

20 hours ago, CRGRRkZ10B said:

Qualcuno è riuscito a far funzionare il fanatec csr con questo titolo? Su kartkraft funziona perfettamente ho comprato anche questo per valutare quale sia il migliore (premetto che io ho un kart vero e vado in pista)ma niente non riesco a fare funzionare la periferica, così sarò costretto a chiedere il rimborso. Acquisto fatto ieri su steam.  Grazie saluti.

Stranamente quando sono stato un giorno ad impazzire e nulla non funzionava prima di fare la richiesta di rimborso ho voluto riprovare e stranamente al primo colpo è funzionato tutto perfettamente. Ora la mia domanda può essere che da Steam scarichi la versione vecchia e si è autoaggiornato?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.