End222 Posted December 12, 2019 Share Posted December 12, 2019 Mi sembra di aver capito che questa utility agisce solo sul volante, e non sui led della base, giusto? Link to comment Share on other sites More sharing options...
Alfred ita Posted December 12, 2019 Share Posted December 12, 2019 (edited) 3 hours ago, End222 said: Mi sembra di aver capito che questa utility agisce solo sul volante, e non sui led della base, giusto? Le basi DD di Fanatec non hanno led ma solo un Display Oled, le impostazioni di questo display oled le puoi modificare solo tramite i pulsanti degli sterzi, invece se parli dei led degli sterzi... si Fanalab li puo' modificare, almeno quelli che lo permettono ovvero i V2. Edited December 12, 2019 by Alfred ita Link to comment Share on other sites More sharing options...
Lele "NightRider" Albanes Posted December 13, 2019 Share Posted December 13, 2019 13 hours ago, Alfred ita said: Le basi DD di Fanatec non hanno led ma solo un Display Oled, le impostazioni di questo display oled le puoi modificare solo tramite i pulsanti degli sterzi, invece se parli dei led degli sterzi... si Fanalab li puo' modificare, almeno quelli che lo permettono ovvero i V2. Credo parli dei led sulla base CSL Link to comment Share on other sites More sharing options...
Alfred ita Posted December 13, 2019 Share Posted December 13, 2019 6 hours ago, Lele "NightRider" Albanes said: Credo parli dei led sulla base CSL Chiedo scusa, non ho seguito il thread dall'inizio e pensavo che si parlasse delle basi DD. Link to comment Share on other sites More sharing options...
End222 Posted December 14, 2019 Share Posted December 14, 2019 On 12/12/2019 at 4:06 PM, End222 said: Mi sembra di aver capito che questa utility agisce solo sul volante, e non sui led della base, giusto? Tutto risolto, una volta aggiornato il firmware funzionano anche i led, molto carini ed utili anche se un pò abbaglianti, in pratica non c'è verso di sbagliare a cambiare perchè il led flashiano proiprio al momento giusto. Link to comment Share on other sites More sharing options...
Fabio Viola Posted December 18, 2019 Share Posted December 18, 2019 Ragazzi potreste mettere il link del download di Fanalab Beta 1.23 per favore che non lo trovo piu su sito Fanatec? Grazie Link to comment Share on other sites More sharing options...
marcoGT Posted December 18, 2019 Share Posted December 18, 2019 https://forum.fanatec.com/discussion/1423/fanalab-1-23-beta-post-your-feedback-here#latest Link to comment Share on other sites More sharing options...
fastnici2 Posted December 24, 2019 Share Posted December 24, 2019 ciao scusate sto cercando di settare fanaled per pedaliera clubsportv3 ma dopo aver fatto le modifiche a vibrazioni e FFB e imposto un nome per il salvataggio del setup mi compare errore windows e fanaled smette di funzionare pertanto non si salvano le mie impostazioni allego immagine sapete come risolvere il problema ? voi riuscite a salvare ? grazie Link to comment Share on other sites More sharing options...
Mariello. Posted January 7, 2020 Share Posted January 7, 2020 Ragazzi, nella vostra esperienza, meglio fanalab o fanaleds? Considerate che ho solo pedaliera V3... Link to comment Share on other sites More sharing options...
VELOCIPEDE Posted January 24, 2021 Author Share Posted January 24, 2021 Fanatec ha rilasciato la v400 del suo Driver Firmware Manager. L'aggiornamento, oltre a correggere vari problemi riscontrati con le periferiche della casa tedesca, porta con sè numerose migliorie, come ad esempio il tool per la calibrazione e la possibilità di salvare un menu personalizzato. Il Fanatec Driver 400 è scaricabile direttamente da qui. Quote Changelog since driver version 381 General New Firmware Manager guiding the user through all firmware updates step by step including instructions and functions to calibrate wheel center, shifter and more. Driver property page now only has one update button which opens the Firmware manager. Firmware Manager can save your Tuning Menu settings and restore them automatically after the update if you want to New function to inform the user if a new steering wheel is attached which the currently installed base firmware doesn't know and can't support. If it is shown the user has to download the most recent driver from the steering wheels download page and update the firmware. Pop-up message on the drivers property page Wheels with 7-segment display will show a blinking "Upd" Wheels with small OLED display will show "CAUTION Please update the Firmware!" Bases or wheels with big OLED display will show "CAUTION Steering Wheel not supported! Please update the Firmware!" ClubSport Pedals V3 Improved smoothness of the load cell / brake pedal signal. Pedals need to be plugged in via USB for the firmware update. Never connect pedals via USB and RJ12 at the same time! In case you want to compare old and new or revert to the old one -> change Firmware Manager to manual update, open the Updater and then use the 3 dots to select version 1.30. Podium DD Wheel Base [LIN] FFB Linearity Tuning Menu Setting now set to ON by default. CSL E Wheel Base 1.1 Fixed: Endstop on left/CCW side comes bit later than on the right/CW side Button Module Endurance Now will show all pop-up messages like the Podium DD display. For example: Torque Key warning, shifter/center calibration instruction and more McLaren GT3 Fixed: Driver does not recognize initial State of 1-12-MPSs after restart if MPS Mode is set to PULSE Driver Fixed missing motor firmware version for CSL E WB 1.1 Fixed pedal vibration buttons missing Implemented Generic Wheel pop-up Firmware versions included CS Pedals V3 : v1.31 (NEW) CSW V1 Base : v684 (NEW) CSW V2 Base : v684 (NEW) CSW V2.5 Base : v684 (NEW) CSL E Base (1.1) : v684 (NEW) CSL E Base PS4 : v684 (NEW) P DD Base : v684 (NEW) P DD WQR : v6 CSL/CSW Motor : v22 DD1 Motor : v40 DD2 Motor : v40 McLaren GT3 : v32 (NEW) McLaren GT3 V2 : v40 (NEW) Formula V2 : v40 (NEW) Podium Hub : v5 (NEW) Podium BME : v17 (NEW) Known Issues After the driver installation or firmware update, it is possible that the wheel base is not shown in the device list anymore. If this is the case, launch the driver installation again and run the repair function. Podium wheel base jolts can happen on ITM or analysis screens of the wheel base display. A workaround is to use the default screen with “Fanatec” logo while driving. Last year we could solve the jolts which happened also on the default screen, we will now work on the remaining jolts on the other analysis and ITM screens. If the Podium DD is put into COMP mode for the first time after driver installation a restart might be needed so the property page can get opened without an error message as the DD is then detected as a new device. BME on Xbox: Guide button acts as long press even when pressed briefly Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now