Gaara80 Posted September 19, 2017 Share Posted September 19, 2017 1 hour ago, Lele "NightRider" Albanes said: Dovrebbe tenerla,al massimo non usare il FF al 100% finchè non hai una postazione. Per seguire le discussioni in alto a destra c'è un "tasto" con scritto "Follow",lo clicchi e la discussione viene seguita in automatico. Si infatti avevo pensato di ridurre un po', staremo a vedere. Ps grazie per l'indicazione Follow. Link to comment Share on other sites More sharing options...
VELOCIPEDE Posted October 18, 2017 Author Share Posted October 18, 2017 GT Sport 🏁 has been released - let's enjoy it like never before with the Fanatec CSL Elite Racing Wheel 🍾🙌 😍❗️ Install the latest firmware v335 (which is included in the driver v293 - link 👇) on your wheel and switch to the Compatibility Mode (purple LED) ✔️ 🔜 Polyphony assured us that they are working on it and will fully implement our wheel with other advanced features later on, including listing in the controller options menu. This revised compatibility mode now adds compatibility to: GT Sport F1 2016 WRC 6 DriveClub 📁 Driver download link: https://www.fanatec.com/goto/CSL-PS4-Wheel-Downloads⚠️Read more in our blog: https://www.fanatec.com/…/fanatec-csl-elite-racing-wheel-gt… Our favourite settings for GT Sport are: - Tuning menu FEI off and all other values default (Hint: reset wheel tuning menu by pressing tuning menu button 10sec.) - in-game setting max torque = 2 and FFB sensitivity = 1 Link to comment Share on other sites More sharing options...
Tjetbenz Posted November 7, 2017 Share Posted November 7, 2017 Ragazzi con il caldo non ho più usato il volante...ieri ho ripreso e ho aggiornato la base come mi proponeva l'eseguibile. Ma sbaglio o il rattling è scomparso?? Link to comment Share on other sites More sharing options...
Lele "NightRider" Albanes Posted November 8, 2017 Share Posted November 8, 2017 10 hours ago, Tjetbenz said: Ragazzi con il caldo non ho più usato il volante...ieri ho ripreso e ho aggiornato la base come mi proponeva l'eseguibile. Ma sbaglio o il rattling è scomparso?? Si con gli ultimi firmware hanno risolto. Link to comment Share on other sites More sharing options...
Uff Posted November 8, 2017 Share Posted November 8, 2017 13 hours ago, Tjetbenz said: Ma sbaglio o il rattling è scomparso? Non ho seguito bene le ultime evoluzioni, ma non vorrei che abbiano settato di default il valore FEI al 50%: prova a darci un occhio, se è così allora probabilmente è quello che smorza un po' gli effetti. Appena riesco aggiorno anche il mio CSL PS4 e provo, l'ultimo FW ancora non l'ho provato. Link to comment Share on other sites More sharing options...
VELOCIPEDE Posted November 9, 2017 Author Share Posted November 9, 2017 Link to comment Share on other sites More sharing options...
Tjetbenz Posted November 10, 2017 Share Posted November 10, 2017 On 8/11/2017 at 12:04 PM, Uff said: Non ho seguito bene le ultime evoluzioni, ma non vorrei che abbiano settato di default il valore FEI al 50%: prova a darci un occhio, se è così allora probabilmente è quello che smorza un po' gli effetti. Appena riesco aggiorno anche il mio CSL PS4 e provo, l'ultimo FW ancora non l'ho provato. Certo vi faccio sapere! sono rimasto positivamente stupito. I driver sarebbero gli ultimissimi usciti: Fanatec Driver 64bit v293 *new*Fanatec Driver 32bit v293 *new* Link to comment Share on other sites More sharing options...
schumy1985 Posted November 22, 2017 Share Posted November 22, 2017 Ciao a tutti. Volevo cambiare volante e prendere il CSL base. La mia domanda è se con un adattatore o mozzo, la base funziona (dato che non ci sarebbe collegamento tra base e volante originale) con un volante diverso da quello Fanatec e collegato a parte tramite USB per via della Sli-Pro, Sarebbero due periferiche ovviamente non collegate insieme. Grazie a tutti. Link to comment Share on other sites More sharing options...
Lele "NightRider" Albanes Posted November 22, 2017 Share Posted November 22, 2017 2 hours ago, schumy1985 said: Ciao a tutti. Volevo cambiare volante e prendere il CSL base. La mia domanda è se con un adattatore o mozzo, la base funziona (dato che non ci sarebbe collegamento tra base e volante originale) con un volante diverso da quello Fanatec e collegato a parte tramite USB per via della Sli-Pro, Sarebbero due periferiche ovviamente non collegate insieme. Grazie a tutti. Purtroppo non funziona,se la base non vede un volante inserito si disattiva. Link to comment Share on other sites More sharing options...
schumy1985 Posted November 22, 2017 Share Posted November 22, 2017 3 hours ago, Lele "NightRider" Albanes said: Purtroppo non funziona,se la base non vede un volante inserito si disattiva. Grazie Lele Immaginavo... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now