[GTR 2] Power&Glory V3 installation instructions

[Aristotelis]

File Name: Power&Glory V3 installation instructions.

File Submitter: Aristotelis

File Submitted: 29 Oct 2012

File Category: Power & Glory v3

Power&Glory V3 Installation instructions

Installer

What you will need:

4 files: PnGv3.0_installer.exe, PnGv3.0.001, PnGv3.0.002, PnGv3.0.003

• Please pay attention to the names of the files, numbered data file names are critical. No extra "[1]" or anything added anywhere in the file names.
  
• All the files should reside in the same folder.
  
• You DON'T need to UNPACK any of these.
  

How to start installing:

Just run PnGv3.0_installer.exe.

If you have P&GV2.1 installed. Please use the Power&GloryV2.1_uninstaller.exe and then the Power&Gloryv2.0_uninstaller.exe and then install V3. We highly recommend starting on a clean GTR2 v1.1.0.0

Notes on the installing process itself:

The install process is straight forward except after a install type selection:

"Please select the desired install type:"

We have 3 choices here to select from, but only 2 of them (#1 and #2) are recommended.

The differences between #1 and #2:

#1 uses an existing GTR2 installation to copy needed files from to a new PnG folder. Copy process will do CRC checking for some of the critical files to ensure that the resulting PnG folder will contain only correct file versions. The GTR2 installation will remain intact, no files will be changed there.

#2 will remove all unnecessary files from the given GTR2 path and add PnG files over them. There will be no CRC checking for the remaining GTR2 files. Naturally this GTR2 installation will not remain intact as it is converted to a full PnG installation.

Both #1 and #2 will copy/save your player profiles to the new PnG installation (if the source has profiles).

Don't use #3, please.

"Destination folder" (with both #1 and #2)

This is the path where your PnG will reside in the end. Note that in #2 this folder should have your preinstalled GTR2 in it to be converted.

"Source folder for GTR2 files" (only with #1)

This should point to a folder where you have a clean GTR2 installation, either version 1.0 or 1.1. The GTR2 files in there will not be modified.

In a popup window: "Would you like your player profiles copied from the GTR2 installation?" (only with #1)

If you answer "No" the installer will not even try to copy your player profiles to the PnG installation. Then when you start PnG the first time you will need to create a new profile for it to use.

Click here to download this file