Problema force feedback G27 - rFactor 2 by ISI - DrivingItalia.NET simulatori di guida Jump to content

Problema force feedback G27


moscax

Recommended Posts

Salve ho un problema molto importante, praticamente con alcune formula tra cui la formula renault ufficiale del gioco e la williams dei mak corp non ho force feedback, come posso risolvere?

 

Grazie in anticipo  :thumbsup:

Link to comment
Share on other sites

prova con anche con ISI_FormulaRenault35_2014 perchè mi sembra di avere un problema simile il volante è troppo leggero

Link to comment
Share on other sites

ho provato un po a smanettare con il ffb (anche io G27) perche per me il feeling era davvero pessimo..

ora va molto meglio, anche se con alcune auto non sono ancora soddisfatto.. comunque se volete provare, ecco qua (fate una copia del controller originale prima):

"Force Feedback":{

"Brake effects on steer axis":0,

"Brake effects on steer axis#":"0 = Brake effects on brake axis, 1 = brake effects on steering axis.",

"Brake effects strength":10000,

"Brake effects strength#":"-10000 to +10000, applies to all brake effects (force, vibration, static spring, etc?)",

"Brake spring coefficient":0.3,

"Brake spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",

"Brake spring saturation":1,

"Brake spring saturation#":"Static spring effect peak force (0.0 to 1.0)",

"Clutch effects on steer axis":0,

"Clutch effects on steer axis#":"0 = Clutch effects on clutch axis, 1 = brake effects on steering axis.",

"Clutch effects strength":10000,

"Clutch effects strength#":"-10000 to +10000, applies to all clutch effects (force, vibration, static spring, etc?)",

"Clutch spring coefficient":0.2,

"Clutch spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",

"Clutch spring saturation":1,

"Clutch spring saturation#":"Static spring effect peak force (0.0 to 1.0)",

"Gearbox effects on steer axis":0,

"Gearbox effects on steer axis#":"0 = Gearbox effects on gearbox 'axis', 1 = brake effects on steering axis.",

"Gearbox effects strength":10000,

"Gearbox effects strength#":"-10000 to +10000, applies to all gearbox effects (force, vibration, static spring, etc?)",

"Gearbox spring coefficient":0,

"Gearbox spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",

"Gearbox spring saturation":1,

"Gearbox spring saturation#":"Static spring effect peak force (0.0 to 1.0)",

"Ignore controllers":0,

"Ignore controllers#":"Do not use FFB on: 1=controller1, 2=controller2, 4=controller3, 8=controller4 (or add values to ignore multiple controllers, for example 15 ignores all)",

"Jolt magnitude":0.5,

"Jolt magnitude#":"How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.",

"Off-road multiplier":0.1,

"Off-road multiplier#":"Temporary test variable to reduce force feedback strength off-road (0.0 = zero FFB, 1.0 = full FFB)",

"Other spring coefficient":0.2,

"Other spring coefficient#":"Static spring effect rate (-1.0 to 1.0) for any other FFB-capable controllers",

"Other spring saturation":1,

"Other spring saturation#":"Static spring effect peak force (0.0 to 1.0) for any other FFB-capable controllers",

"Rumble strip magnitude":0,

"Rumble strip magnitude#":"How strong the canned rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.",

"Rumble strip pull factor":0,

"Rumble strip pull factor#":"How strongly wheel pulls right\/left when running over a rumble strip. Suggested range: -1.5 to 1.5.",

"Rumble strip update thresh":0.05,

"Rumble strip update thresh#":"Amount of change required to update rumble strip effect (0.0 - 1.0)",

"Rumble strip wave type":0,

"Rumble strip wave type#":"Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.",

"Skip updates":0,

"Skip updates#":"Apparently some drivers can't handle a quick FFB update rate, so use this hack to skip the given number of updates (0=full update rate, 1=half, 2=one-third, 3=one-quarter, etc.)",

"Steering effects strength":10000,

"Steering effects strength#":"-10000 to +10000, applies to all steering effects (torque, resistance, static spring, jolt, etc.)",

"Steering resistance coefficient":0.1,

"Steering resistance coefficient#":"Coefficient to use for steering resistance. Range: -1.0 to 1.0",

"Steering resistance saturation":0.1,

"Steering resistance saturation#":"Saturation value to use for steering resistance. Range: 0 - 1.0",

"Steering resistance type":0,

"Steering resistance type#":"0=use damping, 1=use friction",

"Steering spring coefficient":0,

"Steering spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",

"Steering spring saturation":0.1,

"Steering spring saturation#":"Static spring effect peak force (0.0 to 1.0)",

"Steering torque extrap blend":0,

"Steering torque extrap blend#":"Higher blends of extrapolated value allows driver to feel torque changes even when actual torque exceeds 'input max' (0.0=disables, 1.0=max)",

"Steering torque extrap time":0.015,

"Steering torque extrap time#":"Time in seconds to extrapolate steering torque based on current change (Range: 0.001 to 0.050. To disable, set 'blend' to 0.0)",

"Steering torque filter":8,

"Steering torque filter#":"Number of old samples to use to filter torque from vehicle's steering column (0-32, note that higher values increase effective latency)",

"Steering torque minimum":0.1,

"Steering torque minimum#":"Minimum torque to apply in either direction to overcome steering wheel's 'FFB deadzone' caused by friction",

"Steering torque per-vehicle mult":1,

"Steering torque per-vehicle mult#":"Per-vehicle steering column torque multiplier (this is a copy of the .CCH value)",

"Steering torque sensitivity":1.5,

"Steering torque sensitivity#":"Sensitivity curve applied to representable torques: 0.0=low 1.0=linear 2.0=high",

"Steering torque zero-speed mult":0.02,

"Steering torque zero-speed mult#":"Multiplier at zero speed to reduce unwanted oscillation from strong static aligning torque",

"Throttle effects on steer axis":0,

"Throttle effects on steer axis#":"0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.",

"Throttle effects strength":0.3,

"Throttle effects strength#":"-10000 to +10000, applies to all throttle effects (force, vibration, static spring, etc?)",

"Throttle spring coefficient":0,

"Throttle spring coefficient#":"Static spring effect rate (-1.0 to 1.0)",

"Throttle spring saturation":1,

"Throttle spring saturation#":"Static spring effect peak force (0.0 to 1.0)",

"Type":1,

"Type#":"Type of force feedback: 0=off 1=wheel 2=joystick 3=rumble\/gamepad 4=custom"

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.